Windows 10 Build 16294 - The Surface Pro 3 fix build

Late in the day on Sept 20 MS released Windows 10 Build 16294 to Fast Ring Insiders on the rs3.release branch.

 While this release did contain some fixes - it was really 1 fix around Surface Pro 3 boot issues that this build was all about.  The 16288 build hurt a lot of Surface Pro testers and 16291 only partially fixed it.  Ergo the 16294 release yesterday.

 Like with 16291 released a day earlier - the build has no watermarks and a 1709 version ID.

 Also like 16291 - the install on my test machines went smoothly and somewhat quickly with my NUC completing in 32m and my Venue 8 Pro in about 60m.

 As several observers have noted - we are very very close to production release. This latest issue around SP3 devices may push us into next week for final release for Insiders.  The public will see the release on Oct 17.

 On a side note - we have not seen a "Skip Ahead" build now since 9-13 and personally I think the whole skip ahead effort has been a waste of time for both MS and Insiders as little new actually makes it into the builds.  






Comments

Post a Comment

Popular posts from this blog

ASUS RT-AC68U Router & WDS - a nice solution for a large home.

I recently had a newer Asus RT-AC87U Router die.  The wireless chipset never seemed to work well and first the 5Ghz bands started to fail and then the 2.4Ghz failed leaving my 25 wireless device household high and dry. So after some due diligence I decided to replace with 2 of the older RT-AC68U and implement a Wireless Distribution System (WDS) configuration. In the past - I've mentioned an open source router OS called DD-WRT.  The Asus routers come pre-installed with their version of DD-WRT.  Asus does utilize their own UI overtop DD-wrt and overall I do not like nearly as much as the traditional UI - but core dd-wrt capabilities are there.   Additionally you can flash the RT-AC68 with native DD-WRT if your so inclined. In my previous configuration I was also using an older Linksys 4200 running dd-wrt configured in Client Bridge mode that allowed clients to connect to the Linksys as well as use some of the bands to connect back to the RT-AC87U. While it worked - I felt that
Read more

Solar Storage - 2023 Update

  A few years back I published a 2 Part post discussing Solar Energy systems.  The discussion focused on all the due diligence and prep work needed and what were some of the key considerations around designing and implementing a solar system. One of the discussion points was around solar storage or batteries.  What were the use cases for batteries and if they were a good investment and should you incorporate them into your design. Back in 2020 - the math around batteries said no - that you wouldn't be able to break even on the cost of a storage system over its normal warranty life of 10 years. So here we are three years later and so I figured it was time to revisit.   There are two primary uses cases for solar storage.    First is what's called peak offset or peak shifting.  This is a concept where you utilize stored solar generation to run your home during what many utilities call Peak Periods that are part of a general category of rate plans known as Time of Day (TOD) plans.
Read more

Home Automation Platforms + Matter - Early Observations

For those of us who have been involved in automating homes by adding "smart" devices from light switches to thermostats, cameras, sensors, controllers, etc - there was always a challenge with managing the wide range of devices. While each OEM had their own app that would allow you to control their devices - you'd often end up with anywhere from 4 - 10 apps that were required to manage the entire home.  And depending on your product choices you also had to have hubs to communicate from your Wifi network to other RF networks like Zigbee or Z-Wave.  With many of these "hubs" they had native support across multiple vendors or you had to add plugins or provide specific OEM support. Some OEM apps were great, some sucked, but it became challenging to provide a solution for a client where they could easily manage their home on their own.  Between having to maintain multiple credentials/logins across the apps and even communicating which app controls what - it sometimes
Read more